ASSY POWER CORD NS 072396 PUMP REP
This is a brand new power cord assembly for PAC and ROB accessory pumps. Should you need to repair your accessory pump then this power cord will do the trick.
The Robinair 15366 replacement power cord assembly is an aftermarket replacement part made for the 15400, 15600, and 15434 pumps. This replacement part can be used to repair your existing pump, or is compatible with aftermarket products. The power cord is a two wire gauge that comes equipped with an NS plug or 3-pin plug and cover. To install this assembly, simply remove the old one and attach the new one in its place.
The 15366 Replacement Power Cord Assembly is a replacement part for the 15400, 15600, 15434 Series Robinair R22 & R134a Pumps .
This 15366 replacement power cord assembly, which is used with Robinair pumps model 15400, 15600, and 15434.
The Robinair ROB15366 15366 Replacement Power Cord Assembly fits the following Robinair Models: 15400, 15600, 15434 Pumps. The ROB15366 15366 power cord is a 115 volt 3 prong cord with a NEMA 6-15P plug on one end and a straight pin (SAE) plug on the other end. This power cord measures 50 feet long (15.24 meters).
The Robinair ROB15366 Replacement Power Cord Assembly is used in several models of Robinair air/liquid pneumatic pumps. Specifications: - Power cord assembly with 5 amp plug - 16 gauge wire separates into two 14 gauge leads and one ground You will need a power cord assembly for your 15400, 15600, or 15434 pump if it has a round connector with a "keyed" male end. The replacement power cord assembly comes complete with two leads and a separate ground wire that attaches to the pump chassis.
The 15366 is a replacement power cord that includes 4' of cable (pole to plug) and an inline circuit breaker. This assembly is for the following pumps: 15400, 15434, and 15600. The circuit breaker insures that if there is a short in the wiring, it will trip before it causes serious damage to your pump.